LumaBooth Event Photo Booth 4.0.0

version 4.0.0

Mar 26, 2024
Version 4.0.0
New Feature: Professional Camera Support for Photos and Videos!

Enhance your photo and video captures with LumaBooth's latest update. We're excited to announce compatibility with a wide selection of professional mirrorless and DSLR cameras from top brands such as Canon and Nikon. Achieve superior quality in your prints and recordings with the equipment you trust.

• Canon Compatibility: Compatible with most Canon EOS cameras released from 2010 onwards, excluding some EOS M models.
• Nikon Compatibility: Supports Nikon D-series SLR and Z-series mirrorless cameras released from 2012 onwards.

System Requirements:

• iOS/iPadOS 14.2 or later is required for Canon cameras.
• For Nikon cameras, iOS/iPadOS 15 or later is necessary.

Get Connected: Simply use a USB cable to connect your camera. For a step-by-step guide on connecting your device, visit our support site: LumaBooth Camera Setup Guide.
https://support.lumasoft.co/hc/en-us/articles/22252191704731-LumaBooth-Supported-Cameras-and-Camera-Setup-Guide-for-Webcam-Canon-and-Nikon

Step up your photo and video booth with LumaBooth. Your journey towards capturing breathtaking quality starts here!

version 3.11.5

Nov 24, 2023
Version 3.11.5
• Fix for adding multiple files in settings.

version 3.11.2

Oct 5, 2023
Version 3.11.2
SUPPORT FOR MAC M1 AND M2 PROCESSORS
Use your Mac to customize LumaBooth! Run LumaBooth on your Mac M1/M2 computer or laptop to be able to easily create events, templates and more. Log into LumaBooth on your Mac with the same credentials you would use for iPad and iPhone. When changes are made on the Mac they will then sync to any other iPad or iPhone using your account. You can also capture your photo and video events using your M1/M2 Mac with the built-in or external webcam.
WHATSAPP SHARING
If you have internet access during your event, guests can now share their photos and videos via WhatsApp by simply entering their mobile phone number on-screen and scanning a QR code.
After a session, select the WhatsApp option on the sharing screen. You will be prompted to enter your number then a QR code will appear. Scan the QR code with your mobile phone and the photo/video will be shared to your WhatsApp app. You can view and download your guests’ WhatsApp phone numbers under Settings, Sharing Status, WhatsApp.
UPLOAD ORIGINAL PHOTOS
LumaBooth now automatically upload original single photos to fotoshare.co. Guest can then share the strip and/or individual photos. Enable or disable this under Settings, Sharing Settings, Upload Original Photos.
CUSTOM DEVICE NAME
Within LumaBooth you can now customize the name of the iPad or iPhone you are using. The custom name will appear in fotoShare.co under your list of devices, making it easy to identify exactly which devices are being used. Settings, About LumaBooth, Device Name.
TURN OFF SAVING ORIGINAL VIDEOS
By popular request, the option to turn off the saving of original videos has been added to Boomerang and Video. Settings, Capture Settings, Boomerang/Video.
OTHER IMPROVEMENTS:
• Added ability to enter country codes that are longer than 3 digits.
• Fix for two instances of LumaBooth not working with LumaShare on the same network.
• Video thumbnails will show from the middle of video instead of in the beginning so your thumbnails will show your guests instead of any before videos.
• Added uploading animation to Settings, Sharing Status.
• Remove Twitter Sharing due to Twitter's new API rules.
• Remove broken sharing icons in sent e-mails.

v3.11.2
• Fix issue with pending uploads.
• Fix issue with overlays and mp3 files with special characters not being saved.

version 3.11

Sep 26, 2023
Version 3.11
SUPPORT FOR MAC M1 AND M2 PROCESSORS
Use your Mac to customize LumaBooth! Run LumaBooth on your Mac M1/M2 computer or laptop to be able to easily create events, templates and more. Log into LumaBooth on your Mac with the same credentials you would use for iPad and iPhone. When changes are made on the Mac they will then sync to any other iPad or iPhone using your account. You can also capture your photo and video events using your M1/M2 Mac with the built-in or external webcam.
WHATSAPP SHARING
If you have internet access during your event, guests can now share their photos and videos via WhatsApp by simply entering their mobile phone number on-screen and scanning a QR code.
After a session, select the WhatsApp option on the sharing screen. You will be prompted to enter your number then a QR code will appear. Scan the QR code with your mobile phone and the photo/video will be shared to your WhatsApp app. You can view and download your guests’ WhatsApp phone numbers under Settings, Sharing Status, WhatsApp.
UPLOAD ORIGINAL PHOTOS
LumaBooth now automatically upload original single photos to fotoshare.co. Guest can then share the strip and/or individual photos. Enable or disable this under Settings, Sharing Settings, Upload Original Photos.
CUSTOM DEVICE NAME
Within LumaBooth you can now customize the name of the iPad or iPhone you are using. The custom name will appear in fotoShare.co under your list of devices, making it easy to identify exactly which devices are being used. Settings, About LumaBooth, Device Name.
TURN OFF SAVING ORIGINAL VIDEOS
By popular request, the option to turn off the saving of original videos has been added to Boomerang and Video. Settings, Capture Settings, Boomerang/Video.
OTHER IMPROVEMENTS:
• Added ability to enter country codes that are longer than 3 digits.
• Fix for two instances of LumaBooth not working with LumaShare on the same network.
• Video thumbnails will show from the middle of video instead of in the beginning so your thumbnails will show your guests instead of any before videos.
• Added uploading animation to Settings, Sharing Status.
• Remove Twitter Sharing due to Twitter's new API rules.
• Remove broken sharing icons in sent e-mails.

version 3.9.4

Apr 23, 2023
Version 3.9.4
• LumaBooth now supports five new languages: French, German, Italian, Portuguese, and Spanish.
• When a sharing option is selected it will show over the entire screen for easy readability, especially with iPhones.
• View the sharing status for your current event, a different event or all events at once.

Other fixes and tweaks:
• Fix for pre and post roll videos not containing sound when used with boomerang.
• Fix for digital props and signature not printing on 2x6 templates.
• Fix for live preview freezing when disclaimer is rejected.
• Fix for Original filter not applying when allowing guests to choose the filter.
• Added an additional warning when using free trial.

v3.9.2
• Fix for uploads not working when region is set to some non-US countries with 12 hour time format.

v3.9.3
• Fix for app not running on iOS 12, 13, and 14.

v3.9.4
• Fix for fotoShare Cloud upload issue from Turkey.

version 3.9.0

Apr 10, 2023
Version 3.9.0
• LumaBooth now supports five new languages: French, German, Italian, Portuguese, and Spanish.
• When a sharing option is selected it will show over the entire screen for easy readability, especially with iPhones.
• View the sharing status for your current event, a different event or all events at once.

Other fixes and tweaks:
• Fix for pre and post roll videos not containing sound when used with boomerang.
• Fix for digital props and signature not printing on 2x6 templates.
• Fix for live preview freezing when disclaimer is rejected.
• Fix for Original filter not applying when allowing guests to choose the filter.
• Added an additional warning when using free trial.

version 3.8.2

Jan 25, 2023
Version 3.8.2
• Live View on the Welcome screen
You now have the option to display live view to the welcome screen. Guests can now see themselves before starting a session, allowing them to position themselves perfectly.
• Use Additional Fonts
Fonts downloaded to your iPad or iPhone will now appear in LumaBooth's print layout editor allowing you to further customize your event to perfectly fit your theme.
• Load Custom Preview Video
Instead of using the built-in preview video, you can now upload a custom video as your preview video for 360 Boomerangs. Then you be able to see how a custom preview video will playback with your timeline, overlays and soundtrack.
• Save Original Video to Photos app
LumaBooth has always saved the edited video with customizations and timeline settings to the photos camera roll. LumaBooth now also saves the original raw video without any edits. This is very useful to deliver to your clients if needed. It can be used for creating marketing content since it's stored in high resolution and high frame-rate regardless of your edit settings. All original videos will be stored in an album with the name of your event followed by - Footage.
• 360 Timeline reflects clip speed, clip duration, edited file duration, and final file size
The 360 boomerang timeline now now better reflects the edited on-screen duration of each clip making it easier to visualize your changes. The timeline now also shows an estimate of the edited video duration and length.

Other Improvements and Tweaks:
• Sharing via Airdrop no longer shows additional sharing options.
• Fix for virtual attendant media items missing for for default style.
• Fix for booth mode buttons hidden when there is no start screen virtual attendant animation added.
• Boomerang preview will now fill the entire screen when using an iPhone.
• Fix for video thumbnail in emails not showing overlays.
• Fix for background removal overlay showing on all backgrounds.

v3.8.1
• Fix for crash on sms sharing status.

• Live View on the Welcome screen
You now have the option to display live view to the welcome screen. Guests can now see themselves before starting a session, allowing them to position themselves perfectly.
• Use Additional Fonts
Fonts downloaded to your iPad or iPhone will now appear in LumaBooth's print layout editor allowing you to further customize your event to perfectly fit your theme.
• Load Custom Preview Video
Instead of using the built-in preview video, you can now upload a custom video as your preview video for 360 Boomerangs. Then you be able to see how a custom preview video will playback with your timeline, overlays and soundtrack.
• Save Original Video to Photos app
LumaBooth has always saved the edited video with customizations and timeline settings to the photos camera roll. LumaBooth now also saves the original raw video without any edits. This is very useful to deliver to your clients if needed. It can be used for creating marketing content since it's stored in high resolution and high frame-rate regardless of your edit settings. All original videos will be stored in an album with the name of your event followed by - Footage.
• 360 Timeline reflects clip speed, clip duration, edited file duration, and final file size
The 360 boomerang timeline now now better reflects the edited on-screen duration of each clip making it easier to visualize your changes. The timeline now also shows an estimate of the edited video duration and length.

Other Improvements and Tweaks:
• Sharing via Airdrop no longer shows additional sharing options.
• Fix for virtual attendant media items missing for for default style.
• Fix for booth mode buttons hidden when there is no start screen virtual attendant animation added.
• Boomerang preview will now fill the entire screen when using an iPhone.
• Fix for video thumbnail in emails not showing overlays.
• Fix for background removal overlay showing on all backgrounds.

v3.8.2
• Fix for crash on cancelling video capture.

version 3.6.4

Aug 9, 2022 Version 3.6.4
Stability and performance improvements.

version 3.5.4

May 3, 2022 Version 3.5.4
Speed up sharing of large files from locations outside of North America.

version 3.5.2

Apr 12, 2022 Version 3.5.2
Fix for sharing status not working after upgrading LumaBooth on iOS versions less than 15.

version 3.5

Apr 7, 2022 Version 3.5
New Features:

• AI Background Removal - Remove your background without a green screen
• Glam Booth Filter - Awesome black/white filter for the popular glam look.
• Automatically Configure Movement for Auto 360 Recording.

More info at: https://dslrbooth.com/blog/lumabooth-v3-5-ai-background-removal/

version 3.4.4

Apr 1, 2022 Version 3.4.4
LumaBooth now runs on iPhones! Running LumaBooth on iPhones is the perfect solution to capture high quality 360 videos. You can capture videos using LumaBooth and have guests share using our LumaShare app on a separate iPad.

360 BOOTH IMPROVEMENTS
• Supported iPhones: iPhone 13, 12, 11, SE, X, 8, 7, 6 and their various mini, Pro, and Max models. If you'll be using on a 360 spinner, we highly recommend models with an ulrawide-camera (iPhone 11+ or latest iPads) to get a full body shot.
• Drastically improve quality of 360 and other videos.
• Improve motion detection to start recording when 360 arm starts spinning. Detection is now much more accurate and ignores shaking when guests step on and off the platform.

BUG FIXES & TWEAKS
• Change survey results to show on one row per session.
• If print 2 per page is selected for a template, the guest print count pop-up will now show even numbers as each two are on one 4x6.
• Fix for loading m4a files in virtual attendant.
• Fix issue where virtual attendant filename sometimes did not show.

v3.4.2
• Add support for smaller iPhones.
• Fix flickering when capturing a video while effects are on.
LumaBooth now runs on iPhones! Running LumaBooth on iPhones is the perfect solution to capture high quality 360 videos. You can capture videos using LumaBooth and have guests share using our LumaShare app on a separate iPad.

360 BOOTH IMPROVEMENTS
• Supported iPhones: iPhone 13, 12, 11, SE, X, 8, 7, 6 and their various mini, Pro, and Max models. If you'll be using on a 360 spinner, we highly recommend models with an ulrawide-camera (iPhone 11+ or latest iPads) to get a full body shot.
• Drastically improve quality of 360 and other videos.
• Improve motion detection to start recording when 360 arm starts spinning. Detection is now much more accurate and ignores shaking when guests step on and off the platform.

BUG FIXES & TWEAKS
• Change survey results to show on one row per session.
• If print 2 per page is selected for a template, the guest print count pop-up will now show even numbers as each two are on one 4x6.
• Fix for loading m4a files in virtual attendant.
• Fix issue where virtual attendant filename sometimes did not show.

v3.4.2
• Add support for smaller iPhones.
• Fix flickering when capturing a video while effects are on.
• Fix for recording duration cut-off on iPhones with notches.

v3.4.3
• Fix for square boomerangs and videos stretching.
• Add notification when using app on iPhone with display zoom turned on.
• Use boomerang/360 countdown when device is moved rather than recording right away.
• Display notification when session is started due to device moving.
• Add 3x and 4x clip speeds to 360/boomerang clips.
• Fix for emails with larger videos stuck in queue.
• Fix for creating account with invalid email address.

v3.4.4
• Add link to privacy policy and EULA.
• Fix login for email addresses with non alphanumeric characters.

version 3.4.3

Mar 3, 2022 Version 3.4.3
LumaBooth now runs on iPhones! Running LumaBooth on iPhones is the perfect solution to capture high quality 360 videos. You can capture videos using LumaBooth and have guests share using our LumaShare app on a separate iPad.

360 BOOTH IMPROVEMENTS
• Supported iPhones: iPhone 13, 12, 11, SE, X, 8, 7, 6 and their various mini, Pro, and Max models. If you'll be using on a 360 spinner, we highly recommend models with an ulrawide-camera (iPhone 11+ or latest iPads) to get a full body shot.
• Drastically improve quality of 360 and other videos.
• Improve motion detection to start recording when 360 arm starts spinning. Detection is now much more accurate and ignores shaking when guests step on and off the platform.

BUG FIXES & TWEAKS
• Change survey results to show on one row per session.
• If print 2 per page is selected for a template, the guest print count pop-up will now show even numbers as each two are on one 4x6.
• Fix for loading m4a files in virtual attendant.
• Fix issue where virtual attendant filename sometimes did not show.

v3.4.2
• Add support for smaller iPhones.
• Fix flickering when capturing a video while effects are on.
LumaBooth now runs on iPhones! Running LumaBooth on iPhones is the perfect solution to capture high quality 360 videos. You can capture videos using LumaBooth and have guests share using our LumaShare app on a separate iPad.

360 BOOTH IMPROVEMENTS
• Supported iPhones: iPhone 13, 12, 11, SE, X, 8, 7, 6 and their various mini, Pro, and Max models. If you'll be using on a 360 spinner, we highly recommend models with an ulrawide-camera (iPhone 11+ or latest iPads) to get a full body shot.
• Drastically improve quality of 360 and other videos.
• Improve motion detection to start recording when 360 arm starts spinning. Detection is now much more accurate and ignores shaking when guests step on and off the platform.

BUG FIXES & TWEAKS
• Change survey results to show on one row per session.
• If print 2 per page is selected for a template, the guest print count pop-up will now show even numbers as each two are on one 4x6.
• Fix for loading m4a files in virtual attendant.
• Fix issue where virtual attendant filename sometimes did not show.

v3.4.2
• Add support for smaller iPhones.
• Fix flickering when capturing a video while effects are on.
• Fix for recording duration cut-off on iPhones with notches.

v3.4.3
• Fix for square boomerangs and videos stretching.
• Add notification when using app on iPhone with display zoom turned on.
• Use boomerang/360 countdown when device is moved rather than recording right away.
• Display notification when session is started due to device moving.
• Add 3x and 4x clip speeds to 360/boomerang clips.
• Fix for emails with larger videos stuck in queue.
• Fix for creating account with invalid email address.

version 3.4.2

Feb 18, 2022 Version 3.4.2
LumaBooth now runs on iPhones! Running LumaBooth on iPhones is the perfect solution to capture high quality 360 videos. You can capture videos using LumaBooth and have guests share using our LumaShare app on a separate iPad.

360 BOOTH IMPROVEMENTS
• Supported iPhones: iPhone 13, 12, 11, SE, X, 8, 7, 6 and their various mini, Pro, and Max models. If you'll be using on a 360 spinner, we highly recommend models with an ulrawide-camera (iPhone 11+ or latest iPads) to get a full body shot.
• Drastically improve quality of 360 and other videos.
• Improve motion detection to start recording when 360 arm starts spinning. Detection is now much more accurate and ignores shaking when guests step on and off the platform.

BUG FIXES & TWEAKS
• Change survey results to show on one row per session.
• If print 2 per page is selected for a template, the guest print count pop-up will now show even numbers as each two are on one 4x6.
• Fix for loading m4a files in virtual attendant.
• Fix issue where virtual attendant filename sometimes did not show.

v3.4.2
• Add support for smaller iPhones.
• Fix flickering when capturing a video while effects are on.
• Fix for recording duration cut-off on iPhones with notches.

version 3.3.6

Jan 1, 2022 Version 3.3.6
• Add histogram to Camera settings to help in getting proper exposure and white balance. See dslrbooth.com/blog for how-to.
• Choose from all built-in cameras on iPad instead of just switching from front/back. Useful for newest iPads with multiple cameras on front/back (ultra wide/wide).
• Support for newest iPad mini 6.

version 3.3.5

Dec 17, 2021 Version 3.3.5
• Fix for issue in synchronizing some overlays and before/after recording files.
• Clear overlays and before/after video files when creating a new event.
• Clear thumbnails when creating a new event.
• Other minor stability and bug fixes.

version 3.3.4

Dec 2, 2021 Version 3.3.4
2x6 PRINT DESIGN:
If you’re printing to 2×6 paper, you can now design your strip as a 2×6 and LumaBooth will create a 4×6 print for printing on a 4×6 printer which cuts the strip Set your template to 2×6 and make sure to check the option for print 2 copies per page. This allows users to send a single digital copy while printing two 2×6 strips on a single 4×6 page.

SCALE/ALIGNMENT OF PRINTS
Sometimes when printing, the printer is not perfectly aligned and can leave your print not centered and not filling the entire paper. Start by going to Settings > Print Setup, tapping Reset to go back to the default settings, then Print test page. The test page will show you whether the print out is misaligned and will provide instructions on what to do to fix the alignment. Based on that, you can adjust your print alignment by using the sliders to adjust Scale, Horizontal and Vertical positions. You will need to update to the newest version of LumaBooth Assistant to be able to use this feature.

RETAKE SESSION
Allow guests to retake their session while on the sharing screen. Retaking the session will delete the current session’s photos, videos, and final strip.

OPTION TO DISABLE FOTOSHARE CLOUD UPLOADING
In some scenarios for privacy reasons, you might not want to upload any of your event photos/videos online. In this case, you can completely turn off fotoShare Clodu uploading. If fotoShare Cloud is turned off, SMS and QR code functions will also be turned off as well as they can no longer be used since they depend on uploading to fotoShare Cloud.

VISUAL PROGRESS OF SHARING
The Sharing Status screen now provides more information on pending and sent shares. A notice will appear if there is no internet connection, shares that are currently pending and up to date if all shares have gone through.
ADD FILES USING NEW FILES DIALOG
When adding overlays, videos, green screen backgrounds, and other files to your event (PNGs, MP4s, MP3s, etc) you will be prompted to add them using the Files dialog box allowing you to choose from iCloud, On This iPad, Google Drive, Dropbox and Downloads instead of just the iPad photos gallery. This makes is much easier to add any assets to your event. This is a much more streamlined method of adding these files to LumaBooth as you no longer need to send them to yourself, then open them, then save them to the photo roll, then open them the LumaBooth. With this new method, you upload the files from your computer to iCloud, Google Drive, or AirDrop then choose them directly from within LumaBooth. This also organizes your files as you can have different folders for each of templates, gif overlays, start screens, etc…
BUG FIXES & TWEAKS
• Fix for exposure not adjusting properly after a boomerang session where the background is very bright.
• Fix for Bluetooth remote not starting session with iOS 15.
• Fix for From email not showing the correct address set under settings when sending a test email.
• Enter Email window is moved upwards so keyboard does not cover send button.
• Fix for issue where primary and secondary colors are set to the same color which results in the send email/sms buttons getting hidden. These colors should be chosen to be different.
• Fix for issue where user could create an account with a space in the email. address, causing user to not be able to log into fotoshare.co.
v3.3.2
• Fix for adding files not working on iOS 11.
• Stability improvements when app is starting up then goes to background.

v3.3.3
• Add manual camera settings for PHOTO/GIF sessions separate from VIDEO/BOOMERANG sessions.
• Fix for rare issue where session could not start due to other app using camera/microphone.

v3.3.4
• Fix for crash on capture when PHOTO/GIF Camera Settings > Manual Exposure is unchecked.

version 3.3.2

Nov 9, 2021 Version 3.3.2
2x6 PRINT DESIGN:
If you’re printing to 2×6 paper, you can now design your strip as a 2×6 and LumaBooth will create a 4×6 print for printing on a 4×6 printer which cuts the strip Set your template to 2×6 and make sure to check the option for print 2 copies per page. This allows users to send a single digital copy while printing two 2×6 strips on a single 4×6 page.
SCALE/ALIGNMENT OF PRINTS
Sometimes when printing, the printer is not perfectly aligned and can leave your print not centered and not filling the entire paper. Start by going to Settings > Print Setup, tapping Reset to go back to the default settings, then Print test page. The test page will show you whether the print out is misaligned and will provide instructions on what to do to fix the alignment. Based on that, you can adjust your print alignment by using the sliders to adjust Scale, Horizontal and Vertical positions. You will need to update to the newest version of LumaBooth Assistant to be able to use this feature.
RETAKE SESSION
Allow guests to retake their session while on the sharing screen. Retaking the session will delete the current session’s photos, videos, and final strip.

OPTION TO DISABLE FOTOSHARE CLOUD UPLOADING
In some scenarios for privacy reasons, you might not want to upload any of your event photos/videos online. In this case, you can completely turn off fotoShare Clodu uploading. If fotoShare Cloud is turned off, SMS and QR code functions will also be turned off as well as they can no longer be used since they depend on uploading to fotoShare Cloud.
VISUAL PROGRESS OF SHARING
The Sharing Status screen now provides more information on pending and sent shares. A notice will appear if there is no internet connection, shares that are currently pending and up to date if all shares have gone through.
ADD FILES USING NEW FILES DIALOG
When adding overlays, videos, green screen backgrounds, and other files to your event (PNGs, MP4s, MP3s, etc) you will be prompted to add them using the Files dialog box allowing you to choose from iCloud, On This iPad, Google Drive, Dropbox and Downloads instead of just the iPad photos gallery. This makes is much easier to add any assets to your event. This is a much more streamlined method of adding these files to LumaBooth as you no longer need to send them to yourself, then open them, then save them to the photo roll, then open them the LumaBooth. With this new method, you upload the files from your computer to iCloud, Google Drive, or AirDrop then choose them directly from within LumaBooth. This also organizes your files as you can have different folders for each of templates, gif overlays, start screens, etc…
BUG FIXES & TWEAKS
• Fix for exposure not adjusting properly after a boomerang session where the background is very bright.
• Fix for Bluetooth remote not starting session with iOS 15.
• Fix for From email not showing the correct address set under settings when sending a test email.
• Enter Email window is moved upwards so keyboard does not cover send button.
• Fix for issue where primary and secondary colors are set to the same color which results in the send email/sms buttons getting hidden. These colors should be chosen to be different.
• Fix for issue where user could create an account with a space in the email. address, causing user to not be able to log into fotoshare.co.
v3.3.2
• Fix for adding files not working on iOS 11.
• Stability improvements when app is starting up then goes to background.

version 3.3.1

Nov 3, 2021 Version 3.3.1
2x6 PRINT DESIGN:
If you’re printing to 2×6 paper, you can now design your strip as a 2×6 and LumaBooth will create a 4×6 print for printing on a 4×6 printer which cuts the strip Set your template to 2×6 and make sure to check the option for print 2 copies per page. This allows users to send a single digital copy while printing two 2×6 strips on a single 4×6 page.

SCALE/ALIGNMENT OF PRINTS
Sometimes when printing, the printer is not perfectly aligned and can leave your print not centered and not filling the entire paper. Start by going to Settings > Print Setup, tapping Reset to go back to the default settings, then Print test page. The test page will show you whether the print out is misaligned and will provide instructions on what to do to fix the alignment. Based on that, you can adjust your print alignment by using the sliders to adjust Scale, Horizontal and Vertical positions. You will need to update to the newest version of LumaBooth Assistant to be able to use this feature.

RETAKE SESSION
Allow guests to retake their session while on the sharing screen. Retaking the session will delete the current session’s photos, videos, and final strip.

OPTION TO DISABLE FOTOSHARE CLOUD UPLOADING
In some scenarios for privacy reasons, you might not want to upload any of your event photos/videos online. In this case, you can completely turn off fotoShare Clodu uploading. If fotoShare Cloud is turned off, SMS and QR code functions will also be turned off as well as they can no longer be used since they depend on uploading to fotoShare Cloud.

VISUAL PROGRESS OF SHARING
The Sharing Status screen now provides more information on pending and sent shares. A notice will appear if there is no internet connection, shares that are currently pending and up to date if all shares have gone through.

ADD FILES USING NEW FILES DIALOG
When adding overlays, videos, green screen backgrounds, and other files to your event (PNGs, MP4s, MP3s, etc) you will be prompted to add them using the Files dialog box allowing you to choose from iCloud, On This iPad, Google Drive, Dropbox and Downloads instead of just the iPad photos gallery. This makes is much easier to add any assets to your event. We recommend uploading from your desktop to iCloud which will synch to the iPad then simply choosing the files from within LumaBooth. This is now a much more streamlines process.

BUG FIXES & TWEAKS
• Fix for exposure not adjusting properly after a boomerang session where the background is very bright.
• Fix for Bluetooth remote not starting session with iOS 15.
• Fix for From email not showing the correct address set under settings when sending a test email.
• Enter Email window is moved upwards so keyboard does not cover send button.
• Fix for issue where primary and secondary colors are set to the same color which results in the send email/sms buttons getting hidden. These colors should be chosen to be different.
• Fix for issue where user could create an account with a space in the email. address, causing user to not be able to log into fotoshare.co.

version 3.2.7

Sep 4, 2021 Version 3.2.7
This update adds several minor bug fixes to the 3.2 release:
• Change camera settings to be global settings instead of per event.
• Stability improvements.

version 3.2.6

Aug 26, 2021 Version 3.2.6
This update adds several minor bug fixes to the 3.2 release:
• Use bluetooth speaker for audio output from the app if one is connected.
• Remove limit on the number of characters in the email body field.
• Reset camera settings after switching to a new event.
• Replace master camera settings on/off with one specifically for white balance.
• Stability improvements.

version 3.2.5

Aug 21, 2021 Version 3.2.5
This update adds several minor bug fixes to the 3.2 release:
• Fix for reversed section of boomerang having different contrast on some iPads.
• Fix for browse button not appearing for older events after switching events.
• Fix for bluetooth speakers not outputting audio from LumaBooth.
• Default new events to ask guest for filter instead of applying automatically. This can be changed under Settings Effects.

version 3.2.4

Aug 18, 2021 Version 3.2.4
This update adds several minor bug fixes to the 3.2 release:
* Improve performance of screen showing previous sessions with hundreds of sessions.
* Fix for auto white balance using manual settings in some instances.
* Fix for crash where user plays audio during a capture session.
* Fix for crash when pressing print button, DNP printer is selected but is not connected.
* Fix for boomerang settings after switching from a different event.
* Fix for crash if photo + GIF session is cancelled while on the sharing screen exactly after the sharing screen appears.

version 3.2

Aug 5, 2021 Version 3.2
This update adds several boomerang features perfect for 360 booths and other short slow motion and video experiences. New features include:
• Slow down/Speed up and reverse multiple clips in same recorded boomerang.
• Capturing at a high frame-rate.
• Adding an overlay, pre-roll and post-roll video, and a backing soundtrack.
• Start boomerang session recording by moving the iPad, useful for manual 360 spinners.
• High FPS Capture.
• Camera Stabilization for boomerang and video sessions.
• Use iPad pro's ultra-wide cameras and set zoom.

REVERSE AND SLOW DOWN/SPEED UP CLIPS

After setting up the overall length of the video you would like to capture (increased to 15s), you can choose to playback the recorded video either forwards only or forwards then in reverse. Additionally, you can break down the recording into multiple clips with each having a different speed. Choose to speed up certain sections while slowing down others, a great feature for 360 booths.
HIGH FPS CAPTURE

If your timeline has any clips that are slowed down, LumaBooth will automatically set your camera to capture the video in a high frame rate (60fps, 120fps, or 240 fps) depending on your camera’s capabilities and the clip speed. The majority of recent iPads now support 120-240 fps which provide for some great footage that can be slowed down up-to 1/4x. You can see the max frame rate your camera supports under Settings, Camera Settings. The rear camera is recommended as it can always support higher frame rates. To support high frame-rate capture, the ISO and shutter speed settings have been replaced by an exposure slider that applies to photos as well as boomerangs, and video capture.

CAMERA STABILIZATION

If you mount your iPad to moving platform as 360 booth, you will greatly benefit from our camera stabilization feature (Settings, Camera Settings). This feature gets rid of any shaking that occurs resulting in very smooth boomerangs and videos.

USE ULTRA-WIDE CAMERA LENS AND SET ZOOM

LumaBooth will automatically use the camera with the widest available lens. This is useful for all booth modes and especially 360 spinners so you can fit more of your guests in the frame. 2020 iPad Pro introduced an ultra-wide lens in the rear camera. 2021 iPad pro models also have the rear camera ultra-wide lens while also adding another ultra-wide lens to the front camera. In our testing, you can see approximately 4x as much with the ultra-wide lens. Additionally, you can set your zoom level under camera settings.

ADD BOOMERANG SOUNDTRACK

You can now add a custom audio soundtrack to your boomerang by uploading an mp3 file to be played over the final boomerang. Download mp3 files to your iPad from Google Drive, Dropbox or Email. Then click on the option to add mp3 and choose from any mp3 files that are downloaded to your iPad.

MOTION ACTIVATED BOOMERANG

For manual non-motorized 360 spinners, you can have the boomerang start recording by simply moving the iPad. To enable this feature, check the Start capture when iPad is moved box. This feature is perfect for 360 booths, allowing the session to start once the device starts spinning. Set your iPad to start the session when it begins to move. Settings > Capture Settings > Boomerang, check the Start Capture When iPad Is Moved box. You can adjust the sensitivity to only trigger once your spinner moves.
BUG FIXES & TWEAKS

• Fix for SMS message being cut off when over 128 characters.
• Fix for app trying to send old deleted files, causing bottleneck of shares.
• Fix for DNP WPS Pro printer status not continually updating the printer status.
• Fix for rare issue where app freezes on sending SMS message.
• Change order of applying filters to apply in this order: Green Screen, Beauty mode, then Filters.
• Fix for sharing stats table not properly updating some times.
• Hide share by twitter option if video is longer 30s as twitter does not support longer videos.
• Increase boomerang and video resolution to 1280×720.

version 3.1.4

Mar 9, 2021 Version 3.1.4
• Added the option to allow guests to leave a signature or drawing on the final template. Print Layout > Guest Data > Signature.
• Added a setting to tweak the strength of the beauty filter.

Bug Fixes
• Display a warning message for iPads that are older than 2014 that don't support LumaBooth.
• Fix for crash where beauty mode was on from previous version without strength being set after the upgrade.

v3.1.4
• Various bug fixes and stability improvements.

version 3.1.3

Feb 23, 2021 Version 3.1.3
• Added the option to allow guests to leave a signature or drawing on the final template. Print Layout > Guest Data > Signature.
• Added a setting to tweak the strength of the beauty filter.

Bug Fixes
• Display a warning message for iPads that are older than 2014 that don't support LumaBooth.
• Fix for crash where beauty mode was on from previous version without strength being set after the upgrade.

version 3.1.1

Feb 18, 2021 Version 3.1.1
• Added the option to allow guests to leave a signature or drawing on the final template. Print Layout > Guest Data > Signature.
• Added a setting to tweak the strength of the beauty filter.

Bug Fixes
• Display a warning message for iPads that are older than 2014 that don't support LumaBooth.

version 3.0.1

Dec 14, 2020 Version 3.0.1
• Added built-in filters that can be applied to photo, gif, boomerang, and video sessions. There are 8 built-in filters and guest can either choose their own filters or you can set them to apply automatically. You can also enable/disable individual filters to customize each event based on your theme.
• In addition to the built-in filters, you can also create your own filters. This allows you to give a custom look for your events. Custom filters use a common format called LUT that can be created in Adobe Photoshop, Davinci Resolve, and many other applications.
• Added support for WPS Pro firmware v3.

Bug Fixes:
• Fix for rare issue with some boomerangs not playing correctly in Google Chrome.
• Fix for issue selecting a custom background not working right after a new install.

v3.0.1
• On iOS 14, don't allow sessions to run after first install if full photo library permission is not granted. This permission is need to create a new album per event and to store photos and videos from LumaBooth in your Photos application.

version 2.9.6

15 Oct 2020 Version 2.9.6
• Improved Boomerang and Green Screen Processing: Boomerangs and green screen effects are now higher in quality, smoother and process faster. We have also added a faster speed of 30ms for quicker boomerangs.
• Video/Boomerang Green Screen: Similar to photo sessions, during video and boomerang sessions, you can now use a replace your green screen background with any custom backgrounds.
• Fix for final strip not saving if digital stickers are on and user does not add any stickers.
• Support for iOS 14.

v2.9.5
• Fix for not being able to take sessions when there is green screen is on but no background was added.
• Fixed delay appearing on LiveView before taking a new photo of the print session.
• Other minor bug fixes.

v2.9.6
• Fix for stretching with square boomerangs.

version 2.9.6

Oct 15, 2020 Version 2.9.6
• Improved Boomerang and Green Screen Processing: Boomerangs and green screen effects are now higher in quality, smoother and process faster. We have also added a faster speed of 30ms for quicker boomerangs.
• Video/Boomerang Green Screen: Similar to photo sessions, during video and boomerang sessions, you can now use a replace your green screen background with any custom backgrounds.
• Fix for final strip not saving if digital stickers are on and user does not add any stickers.
• Support for iOS 14.

v2.9.5
• Fix for not being able to take sessions when there is green screen is on but no background was added.
• Fixed delay appearing on LiveView before taking a new photo of the print session.
• Other minor bug fixes.

v2.9.6
• Fix for stretching with square boomerangs.

version 2.9.5

Oct 7, 2020 Version 2.9.5
• Improved Boomerang and Green Screen Processing: Boomerangs and green screen effects are now higher in quality, smoother and process faster. We have also added a faster speed of 30ms for quicker boomerangs.
• Video/Boomerang Green Screen: Similar to photo sessions, during video and boomerang sessions, you can now use a replace your green screen background with any custom backgrounds.
• Fix for final strip not saving if digital stickers are on and user does not add any stickers.
• Support for iOS 14.

v2.9.5
* Fix for not being able to take sessions when there is green screen is on but no background was added.
* Fixed delay appearing on LiveView before taking a new photo of the print session.
• Other minor bug fixes.

version 2.9.4

Sep 25, 2020 Version 2.9.4
• Improved Boomerang and Green Screen Processing: Boomerangs and green screen effects are now higher in quality, smoother and process faster. We have also added a faster speed of 30ms for quicker boomerangs.
• Video/Boomerang Green Screen: Similar to photo sessions, during video and boomerang sessions, you can now use a replace your green screen background with any custom backgrounds.
• Fix for final strip not saving if digital stickers are on and user does not add any stickers.
• Support for iOS 14.
• Other minor bug fixes.

version 2.9.2

Mar 13, 2020 Version 2.9.2
• Stickers: Allow your guests to add stickers to their final print. Use the built-in stickers or upload your own.
• Larger Sharing Icons: The sharing icons have been increased in size to allow for easier viewing. The countdown is now shown as a line at the top that will decrease as time counts down.
• Split Survey Responses by Event: View survey responses by event or choose all to view responses from all events.

This update also:
• Creates smoother boomerangs.
• Fixes boomerangs appearing mirrored on sharing screen.
• Adds scroll bar to multiple choice survey answers.
• Fixes print dialog re-opening for certified AirPrint printers. Issue with dialog opening for non-certified printers such as Airkonv will be fixed by iOS 13.4.
• Fixes virtual attendant custom selections getting erased when changing the virtual attendant style.

v2.9.1
• Fix for stickers settings opening when locking from the start screen and other minor bug fixes.

v2.9.2
• Speed up boomerang processing.
• Save final image with stickers in photo roll instead of without stickers.

version 2.9.1

Mar 11, 2020 Version 2.9.1
• Stickers: Allow your guests to add stickers to their final print. Use the built-in stickers or upload your own.
• Larger Sharing Icons: The sharing icons have been increased in size to allow for easier viewing. The countdown is now shown as a line at the top that will decrease as time counts down.
• Split Survey Responses by Event: View survey responses by event or choose all to view responses from all events.

This update also:
• Creates smoother boomerangs.
• Fixes boomerangs appearing mirrored on sharing screen.
• Adds scroll bar to multiple choice survey answers.
• Fixes print dialog re-opening for certified AirPrint printers. Issue with dialog opening for non-certified printers such as Airkonv will be fixed by iOS 13.4.
• Fixes virtual attendant custom selections getting erased when changing the virtual attendant style.

v2.9.1
• Fix for stickers settings opening when locking from the start screen and other minor bug fixes.

version 2.8.4

Feb 6, 2020 Version 2.8.4
* Improves connection to LumaBooth Assistant.

version 1.2.4

version 3.0.1

2020年12月14日 Version 3.0.1
• Added built-in filters that can be applied to photo, gif, boomerang, and video sessions. There are 8 built-in filters and guest can either choose their own filters or you can set them to apply automatically. You can also enable/disable individual filters to customize each event based on your theme.
• In addition to the built-in filters, you can also create your own filters. This allows you to give a custom look for your events. Custom filters use a common format called LUT that can be created in Adobe Photoshop, Davinci Resolve, and many other applications.
• Added support for WPS Pro firmware v3.

Bug Fixes:
• Fix for rare issue with some boomerangs not playing correctly in Google Chrome.
• Fix for issue selecting a custom background not working right after a new install.

v3.0.1
• On iOS 14, don't allow sessions to run after first install if full photo library permission is not granted. This permission is need to create a new album per event and to store photos and videos from LumaBooth in your Photos application.

version 2.9.2

2020年3月13日 Version 2.9.2
• Stickers: Allow your guests to add stickers to their final print. Use the built-in stickers or upload your own.
• Larger Sharing Icons: The sharing icons have been increased in size to allow for easier viewing. The countdown is now shown as a line at the top that will decrease as time counts down.
• Split Survey Responses by Event: View survey responses by event or choose all to view responses from all events.

This update also:
• Creates smoother boomerangs.
• Fixes boomerangs appearing mirrored on sharing screen.
• Adds scroll bar to multiple choice survey answers.
• Fixes print dialog re-opening for certified AirPrint printers. Issue with dialog opening for non-certified printers such as Airkonv will be fixed by iOS 13.4.
• Fixes virtual attendant custom selections getting erased when changing the virtual attendant style.

v2.9.1
• Fix for stickers settings opening when locking from the start screen and other minor bug fixes.

v2.9.2
• Speed up boomerang processing.
• Save final image with stickers in photo roll instead of without stickers.

version 2.9.6

2020年10月15日 Version 2.9.6
• Improved Boomerang and Green Screen Processing: Boomerangs and green screen effects are now higher in quality, smoother and process faster. We have also added a faster speed of 30ms for quicker boomerangs.
• Video/Boomerang Green Screen: Similar to photo sessions, during video and boomerang sessions, you can now use a replace your green screen background with any custom backgrounds.
• Fix for final strip not saving if digital stickers are on and user does not add any stickers.
• Support for iOS 14.

v2.9.5
• Fix for not being able to take sessions when there is green screen is on but no background was added.
• Fixed delay appearing on LiveView before taking a new photo of the print session.
• Other minor bug fixes.

v2.9.6
• Fix for stretching with square boomerangs.

version 2.9.4

25 de sep. de 2020 Version 2.9.4
• Improved Boomerang and Green Screen Processing: Boomerangs and green screen effects are now higher in quality, smoother and process faster. We have also added a faster speed of 30ms for quicker boomerangs.
• Video/Boomerang Green Screen: Similar to photo sessions, during video and boomerang sessions, you can now use a replace your green screen background with any custom backgrounds.
• Fix for final strip not saving if digital stickers are on and user does not add any stickers.
• Support for iOS 14.
• Other minor bug fixes.